• The wetting machine has been designed to realise the humidification of the wool of the skins by means of special products, both for a later ironing, decolouring or to produce decorative effects on the skins.
• In the instructions for this machine one has taken into account the working conditions and for that reason all the parts which are in contact with the skins and the wetting liquids are made from stainless steel. The skins are introduced into the machine by a conveying belt with a variable speed from 2,5 to 20 metres/minute. The solution is poured on the skins by means of a buffering roller with a variable speed, what permits to control the quantity of solution applied to the wool. Later on the skins go through a brushing cylinder whose function is to even the skin and make the solution penetrate up to the desired depth. This cylinder, which is equipped with brushes, is driven automatically to avoid spots on the skin, both in the loading and in the unloading of the skin into and out of the machine.
• The wet skins are returned to the front part of the machine by a thread conveyor. This permits the machine to be controlled by a sole operator. The machine is supplied equipped with its corresponding reservoirs of liquid with a capacity of 80 litres each one of them and equipped with the corresponding filters both in the recycling and in the vacuum section of the pump. The reservoirs are connected to each other though a set of valves to permit the wetting with the various types of desired liquids.
• To eliminate the vapours and smells produced during the wetting process, the machine is equipped with an exhausting installation build with anti-roast material with a high yeald, with an aspiration capacity of 2.850 m3/hour.
• Electric board and security devices are incorporated.

Through-type ironing machine GTI-70-80-90-125 is a large-scale double-face and fur processing equipment, it is GIANTEY-specially designed for wool-on lambskin processing, it combines the advantages of reciprocating-type and through-type from the two kinds of ironing equipment, our any existing ironing machine can not be compared with it, both speed and quality. A variety of large wool-on lambskin and fur can be continuously ironed by this machine, with both automatic or manual operation. The feed speed is adjusted by the controlled hydraulic motor, which is convenient and reliable.

http://mails.100sg.cn/en/?p=2760

Can cut mink and other tube skins into strips

Technical Data:

A fur tube negative pressure formation machine with high speed and low labor intensity. It includes a bellows, a skin-turning pipe, and a sieve plate is arranged in bellows. When in use, put the knife-edge of the tubular fur on the air inlet end of the leather turning pipe and manually pinch it by hand, start the air compressor, and draw the other end of the fur barrel into the leather turning pipe by the wind to achieve turning. The advantage is that the speed is fast and the labor intensity is low.

Technical Data:

After oil tanning, the oil is slowly oxidized under certain temperature and humidity conditions, and the oxidized polymer wraps the collagen fibers to make the collagen fibers movable and hydrophobic. The finished leather is light yellow, soft, loose foam, napped on both sides, fine and silky down hair, good extensibility, water absorption, moisture permeability, washing resistance, and does not change shape after drying.

Technical Data:

The ironing roller is made of steel, mirror polished, the heating temperature is uniform, the working temperature can be set freely, and the temperature is automatically controlled. The wrinkled leather can be ironed to make the surface of the leather smooth and brighter. Suitable for belts, purses, wallets, and footwear.

Technical Data:

It is suitable for small-sized skins such as mink and rabbit skins. The spiral knife has the characteristics of energy-saving and high efficiency, which can effectively improve the surface quality of the skins and reduce blade consumption.

Technical data：

Through-type ironing machine GTI-70-80-90-125 is a large-scale double-face and fur processing equipment, it is GIANTEY-specially designed for wool-on lambskin processing, it combines the advantages of reciprocating-type and through-type? from the two kinds of ironing equipment, our any existing ironing machine can not be compared with it, both speed and quality. A variety of large wool-on lambskin and fur can be continuously ironed by this machine, with both automatic or manual operation. The feed speed is adjusted by the controlled hydraulic motor, which is convenient and reliable.

The machine is equipped with a special conveyor belt and triangular support mechanism, conveyor belt is made of advanced and anti-high temperature chemical fiber, it is woven of barrel-like structure, ironed wool-on skin through the ironing roller is automatically sent out. According to the length of sheepskin hair size, operator can adjust the conveyor belt to the best rolling angle and right pressure, to ensure that the ironing effect to achieve the best. The ironing cylinder is made of anti-corrosive materials and contains 36 high-quality armored heat-resistant heating tubes, the operating temperature is automatically controlled by the electronic temperature control meter, so that the hot ironing cylinder is always kept at the right level of the working temperature。

GTI type series of auto- ironing machine by manual operation can also be automatically changed to through -type, it is well-designed for fast-working, high efficiency and reliable safety, it is the first choice among ironing machines for large and medium-sized fur and double-face processing enterprises.

Technical data：

Tianjin Giantey Machinery Co., Ltd. has produced the traditional machine GRS-125, CYLINDER WET SHEARING MACHINE, for many years, this machine is well used in the lambskin production processing, especially in the production of double-face. It cuts the wool at the very beginning for the skins with short wool, it is well used for raw lambskins, wet or dry.

This working cylinder has four blades, working for a long-time term, the blade is for shearing and strong for usage, it is free of maintenance normally. This machine could shear all raw and wet lambskins, with the perfect shearing result being uniform, even, defect-free, automatic, maintaining-nearly-free, and long-life. All the material contacting with water or chemical has well proceeded with corruption-prevent measures.

Technical data:

Technical data：